The Benchdogs Fence System Ver2.1 Our revised fence now comes with the under rail support complete in one piece. The 2000mm fence has been machine with 200mm removed from the fence...
Our revised fence now comes with the under rail support complete in one piece. The 2000mm fence has been machine with 200mm removed from the fence leaving a 200mm x 7.5mm under rail support piece, with ruler scale markings set from 0 - 74", ideal for the MFT3 size tops. further additional extrusion can still be added for extra length.
Our new specially designed fence system for the use of Festool tops or any other tops with a 20mm hole to be able to fix your fence and allow for repeatable cuts without losing valuable space behind the fence, allowing your MFT top to be closed to a wall and to save space.
Scroll down to the demonstration video below on how to use the Fence System
Please note that the Quad Fence Dogs do not allow you to remove your fence by detaching it from the fence. These are more suited if you have your fence permanently positioned on your MFT.
If you require 3/4" Quad Fence Dogs® please add a note at the checkout before ordering.
The set is fairly accurate. I measured all of them and the most accurate setup block was the 1mm, which measured 1.01mm. Well within tolerances for wood working. The thing that I wasn't impressed with, was the finish. You can see the swirl machining marks on every block, with the 25x75x50 block showing the most. I will admit I don't have much experience with setup blocks. My only other set is imperial brass and they are perfectly smooth. It may just be a difference in materials.
I do want to celebrate the mini sustainer and it's clever design. I can't help but smile every time I open it!