PLEASE NOTE THESE ARE NOT FOR THE BENCHDOGS RAIL SQUARES. THESE ARE FOR FESTOOLS OWN BRAND AND TSO SQUARE The most requested add-on for our Rail Square has been the...
PLEASE NOTE THESE ARE NOT FOR THE BENCHDOGS RAIL SQUARES. THESE ARE FOR FESTOOLS OWN BRAND AND TSO SQUARE
The most requested add-on for our Rail Square has been the ability to do repeatable cuts without the option of a parallel guide system. We now have this product here.
Our repeat-cut system allows you to attach the main fence to the square and have repeatable square cuts to the desired length.
The main system comprises a machined extrusion of 600mm up to 590mm, and for a longer cut up to 1030mm add the 445 extension.
Our system allows you to calibrate from your cut line and then fix the calibration stop in place to remove the fence and reattach it without recalibration.
Compatibility: The Rail Square Repeat Stop is compatible with Festool FS-WA/90, TSO GRS-16PE, TSO GRS-16 Rail Squares.
Scroll down to the demonstration video below on how to use the Rail Square with the Repeat Stop.
You will receive the following.
1 x Machined Rail Square Fence (600mm) 2 x Stainless Steel Thumb Screw M6 1 x Aluminium Stop with Fixings 1 x Add-on Extrusion (445mm) 1 x Joining Bar 1 x Calibration Stop 1 x Connector Block
*Images are examples of what the product looks like
*Please Note: The Repeat Stop does not come with the Rail Square.
The set is fairly accurate. I measured all of them and the most accurate setup block was the 1mm, which measured 1.01mm. Well within tolerances for wood working. The thing that I wasn't impressed with, was the finish. You can see the swirl machining marks on every block, with the 25x75x50 block showing the most. I will admit I don't have much experience with setup blocks. My only other set is imperial brass and they are perfectly smooth. It may just be a difference in materials.
I do want to celebrate the mini sustainer and it's clever design. I can't help but smile every time I open it!